Large Drilling Range
Supports diamond core drilling up to 600mm with the correct setup and bit.
Details
Product Details
Built for large service openings and steady controlled feed
The Shibuya TS603FS is a large-capacity coring rig for floor, wall and reinforced-concrete openings. Its rigid stand, 625mm stroke and three-speed R2531 motor suit wet drilling jobs where bit alignment, torque and controlled feed matter more than portability.
Technical Features
Designed for heavy concrete coring
Three-Speed Gearbox
Low spindle speeds match the torque requirements of larger core diameters.
Rigid Feed Column
The stand maintains alignment during deep or large-diameter drilling.
Drive Protection
Circuit protection and clutch functions help protect the motor under load.
Product Data
Technical Specifications
| Specification | Details |
|---|---|
| Model | TS603FS |
| Maximum Drilling Diameter | 600mm |
| Motor Model | R2531 |
| Rated Input | 2,500W |
| No-Load Speed | 150 / 300 / 600rpm |
| Available Stroke | 625mm |
| Overall Height | 1,100mm |
| Base Size | 230 x 400mm |
| Spindle Thread | A-Rod |
| Approximate Weight | 65.4kg |
Frequently Asked Questions
Shibuya TS603FS Coring Machine questions
What work suits the TS603FS?
It suits large concrete service openings where a rigid stand and controlled feed are required.
Can it core reinforced concrete?
Yes, with a suitable wet diamond core bit and correct water supply.
Are core bits included?
Core bits are selected separately according to diameter, depth and material.
What details are needed for selection?
Provide hole diameter, depth, material, drilling direction and site power supply.
Plan a TS603FS coring setup
Send us the required hole diameter, depth, material and drilling direction.
Enquire on WhatsAppView more about Shibuya TS603FS Coring Machine Singapore | 600mm Core Drill on main site