180mm Capacity
Covers many plumbing, electrical and air-conditioning penetrations.
Details
Product Details
Portable stand control for small-to-medium concrete openings
The Shibuya TS162 is well suited to plumbing, electrical and air-conditioning penetrations up to 180mm. Its compact base is easier to place in service areas, while the two-speed motor and stand provide the alignment needed for controlled wet drilling.
Technical Features
Made for tighter building-service areas
Two-Speed Motor
Two spindle speeds support different core bit diameters.
Compact Stand
The smaller footprint helps when working in tight rooms and service areas.
Water Swivel
The drilling setup supports a hose connection for wet core drilling.
Product Data
Technical Specifications
| Specification | Details |
|---|---|
| Model | TS162 |
| Maximum Drilling Diameter | 180mm |
| Motor Model | R1521 |
| Rated Input | 1,500W |
| Voltage | AC220-240V, 50/60Hz |
| No-Load Speed | 700 / 1,000rpm |
| Available Stroke | 548mm |
| Overall Height | 803mm |
| Base Size | 146 x 205mm |
| Spindle Thread | A-Rod / 1-1/4 inch UNC |
Frequently Asked Questions
Shibuya TS162 Coring Machine questions
What work suits the TS162?
It suits plumbing, electrical and air-conditioning penetrations up to 180mm.
Can the feed handle be repositioned?
The stand supports feed-handle positioning on either side.
Can it drill reinforced concrete?
Yes, with the correct wet diamond core bit and operating procedure.
What should I confirm before ordering?
Confirm diameter, depth, material, drilling direction and site power.
Check a TS162 drilling setup
Tell us the opening size and where the hole must be drilled.
Enquire on WhatsAppView more about Shibuya TS162 Coring Machine Singapore | 180mm Core Drill on main site