External, Not Immersion
The vibration board acts from outside the formwork. This machine is not a flexible-shaft poker and should not be immersed in wet concrete.
Mikasa MGZ-F100A External Concrete Vibrator Rental Singapore
Category: Construction Equipment Rental
Specifications
Details
Where It Fits
Apply vibration from outside the formwork
The MGZ-F100A is a portable external concrete vibrator for walls, columns, beams and similar pours where dense reinforcement or limited access makes an internal poker difficult to use. Its vibration board works against the outside of suitable formwork or a formwork support member. The formwork and contact point must be checked before operation.
Current Rental Unit
MGZ-F100A shown in the Boke listing
This is a used rental machine. The model and published mechanical data are identified from the existing listing and Mikasa manufacturer information. Confirm the actual unit's voltage, plug and cable condition before collection or delivery.
Machine Data
MGZ-F100A specifications
| Specification | Details |
|---|---|
| Brand | Mikasa |
| Model | MGZ-F100A |
| Equipment Type | Portable external concrete vibrator |
| Motor Output | 280 W |
| Vibration Frequency | 166-200 Hz |
| Vibration Speed | 10,000-12,000 vpm |
| Overall Size | 395 x 78 mm |
| Vibration Board Size | 78 x 100 mm |
| Weight | 5.0 kg |
| Power Arrangement | Corded electric; confirm actual rental-unit voltage and plug |
Rental Planning
Check the formwork and pour before booking
Contact Point
Identify a suitable formwork or support location that can transmit vibration without damage, loosening or unwanted movement.
Pour Geometry
Share the wall, column, beam or precast detail, reinforcement density and access conditions so the vibration method can be assessed.
Electrical Supply
Confirm the actual rental unit's voltage, plug and cable requirements. Keep electrical connections protected from wet concrete and site water.
Rental Questions
Before renting the MGZ-F100A
Is the MGZ-F100A an internal poker vibrator?
No. It is a portable external concrete vibrator. The vibration board is applied to suitable formwork or a support member so vibration is transmitted into the concrete from outside.
Where is an external concrete vibrator normally used?
It is intended for concrete walls, columns, beams and similar work where reinforcement is dense or an internal vibrator cannot reach the required area effectively.
Can the vibration board be placed directly into wet concrete?
No. The MGZ-F100A is not an immersion-type vibrator. Use it only as an external vibrator and follow the manufacturer operating instructions.
What should be checked on the formwork?
Confirm the formwork material, bracing, joints, contact point and whether vibration could loosen fasteners, move the form or mark a finished surface. The site supervisor should approve the method.
What information should I send before booking?
Send the pour type, formwork material, wall or column dimensions, reinforcement density, access conditions, available electrical supply, rental dates and site location.
Confirm the formwork, power and rental dates
Share the pour detail and site conditions so Boke Tools can check whether the MGZ-F100A is suitable for the work.
Check rental availabilityView more about Mikasa MGZ-F100A External Concrete Vibrator Rental Singapore on main site